Toro 30320, Руководство оператора

Страница: 17 / 48

17
5. Check the parking brake adjustment (Fig. 10). Refer to
Checking the Brakes, page 31.
Note: Make sure brake rod is installed in front (F)
mounting hole in idler bracket.
1
2
m–5233
3
Figure 10
1. Upper control bar
2. Parking brake lever
3. Fixed bar
5
Step
Parts needed for this step:
•
2 Hairpin cotter pins
Installing the Hairpin Cotter
Pins and Washers
Unused height–of–cut spacers may be stored on posts and
retained by a hairpin cotter.
1. On the opposite side of the muffler, install unused
washers and hairpin cotter pins into front and rear
height–of–cut pins (Fig. 11).
m-6505
3
2
1
Figure 11
1. Hairpin cotter
2. Unused spacers
3. Height–of–cut post