Toro 23740, Руководство оператора

Страница: 22 / 24

Problem Possible Cause Corrective Action
1. The broom assembly is loose or
damaged.
1. Tighten the hardware. Replace
the broom assembly or contact an
authorized service dealer.
2. The engine mounting bolts are loose. 2. Tighten the engine mounting bolts.
3. engine pulley or idler pulley is loose. 3. Tighten the appropriate pulley.
4. The engine pulley is damaged. 4. Contact an authorized service dealer.
There is abnormal vibration.
5. The belt is damaged. 5. Install a new belt.
The broom does not stop when the drive
lever is released. 1. The broom drive belt is out of
adjustment.
1. Check the broom drive adjustment.
The broom wears out prematurely. 1. You are using the incorrect broom
height.
1. Adjust the broom height.
The speed selector is difficult to move or
frozen in place. 1. The hex shaft needs lubrication. 1. Lubricate the hex shaft.
22