Toro 23740, Руководство оператора

Страница: 14 / 24

the front of the machine on the pavement. Repeat if
necessary.
•
If you cannot unclog the broom by bumping the front
of the machine:
– Park the machine on level ground. Stop the engine,
wait for all moving parts to stop, and remove the
spark plug wire(s).
– Sharp objects can become entangled in bristles. Use
gloves and caution when cleaning out the broom of
foreign objects; not bare hands.
Preventing Freeze-up
•
In snowy and cold conditions, some controls and moving
parts may freeze. Do not use excessive force when
trying to operate frozen controls. If you have difficulty
operating any control or part, start the engine and let it
run for a few minutes.
•
After using the machine, let the engine run for a few
minutes to prevent moving parts from freezing. Engage
the broom to clear any remaining snow from inside the
housing. Stop the engine and wait for all moving parts to
stop, and remove the spark plug wire(s). Remove all ice,
snow, or other debris from the machine.
•
Reconnect spark plug wire(s). With the engine switch in
the Off position, pull the recoil starter handle several
times to prevent the recoil starter from freezing up.
Transporting the Machine
WARNING
Loading the machine onto a trailer without strong
enough or properly supported ramps could be
dangerous. The ramps could collapse causing the
unit to fall, which could cause injury.
• Use proper ramps that are secured to the truck
or trailer.
• Keep feet and legs out from under the unit when
loading and unloading.
• If necessary, use assistance when loading.
Be sure the fuel shut-off valve is closed.
Use a heavy duty trailer to transport the machine. Place the
machine in either a forward or reverse gear, then block the
wheels.
Securely fasten the machine to the trailer with straps, chains,
cables, or ropes.
Be sure that the trailer has all necessary lighting and marking
as required by law.
14