Toro 22445, Руководство оператора, Страница: 10 / 16

g030786
Figure 7
1. Left tine 2. Right tine
Note:
The cutting edges of the tines should
face toward the rear of the tiller.
4. Torque the tine-mounting bolts to 85 to 104 N-m
(63 to 77 ft-lb).
Checking the Hydraulic
Lines
Service Interval: Before each use or daily
WARNING
Hydraulic fluid escaping under pressure can
penetrate skin and cause injury. Fluid injected
into the skin must be surgically removed
within a few hours by a doctor familiar with
this form of injury; otherwise, gangrene may
result.
• Keep your body and hands away from
pinhole leaks or nozzles that eject
high-pressure hydraulic fluid.
• Use cardboard or paper to find hydraulic
leaks; never use your hands.
Storage
1. Before long term storage, wash the attachment
with mild detergent and water to remove dirt and
grime.
2. Check the condition of the drive chain. Adjust
and lubricate the chain.
3. Grease all fittings.
4. Check and tighten all bolts, nuts, and screws.
Repair or replace any damaged or worn parts.
5. Paint all scratched or bare metal surfaces. Paint
is available from your Authorized Service Dealer.
6. Store the tiller in a clean, dry garage or storage
area. Cover the tiller to protect it and keep it
clean.
10