Removing the Front Cover
Assembly
1.
Raise the loader arms and secure them with the
cylinder locks.
2.
Open the hood.
3.
Remove the 4 bolts securing the cover assembly
to the machine.
g363210
Figure 65
4.
Remove the cover assembly.
Removing the Side Screens
1.
Open the hood.
2.
Slide the screen out of the front and rear slots.
g363164
Figure 66
1.
Side screen
Lubrication
Greasing the Machine
Service Interval:
Before each use or daily (Grease
immediately after every washing.)
Grease Type:
General-purpose grease.
1.
Park the machine on a level surface, engage the
parking brake, and lower the loader arms.
2.
Shut off the engine and remove the key.
3.
Clean the grease fittings with a rag.
g359308
Figure 67
4.
Connect a grease gun to each fitting.
5.
Pump grease into the fittings until grease begins
to ooze out of the bearings (approximately 3
pumps).
6.
Wipe up any excess grease.
45
