Toro 22327, Руководство оператора

Страница: 32 / 60

4. Engage the parking brake, shut off the engine, and
remove the key.
5. Drain the oil beneath the platform ( Figure 47 ).
CAUTION
Components will be hot if the machine has
been running. If you touch hot components,
you may be burned.
Use care to avoid touching hot components
while changing the oil and/or filter.
g031212
g029385
Figure 47
6. Remove the oil-fill cap and slowly pour approximately
80% of the specified amount of oil in through the
valve cover.
7. Check the oil level.
8. Slowly add additional oil to bring the level to the upper
hole on the dipstick.
9. Replace the fill cap.
Changing the Oil Filter
1. Raise the loader arms and secure with the cylinder
locks; refer to
Installing the Cylinder Locks (page 26) .
2. Engage the parking brake, shut off the engine, and
remove the key.
3. Remove the front cover; refer to Removing the Front
Cover (page 28) .
4. Drain the oil from the engine; refer to Changing the
Engine Oil (page 31) .
5. Place a shallow pan or rag under the filter to catch oil.
6. Change the oil filter ( Figure 48 ).
g029749
Figure 48
7. Remove the oil-fill cap and slowly pour approximately
80% of the specified amount of oil in through the
valve cover.
8. Check the oil level.
9. Slowly add additional oil to bring the level to the upper
hole on the dipstick.
10. Replace the fill cap.
11. Install the front cover; refer to Removing the Front
Cover (page 28) .
32