Toro 22327, Руководство оператора, Страница: 27 / 60

Accessing Internal
Components
WARNING
Opening or removing covers, hoods, and screens
while the engine is running could allow you to
contact moving parts, seriously injuring you.
Before opening any of the covers, hoods, and
screens, shut off the engine, remove the key from
the key switch, and allow the engine to cool.
Opening the Hood
1. Loosen the hood-locking screw ( Figure 34 )
g031215
Figure 34
1. Hood-locking screw 3. Hood
2. Hood-latch lever
2. Turn the hood latch clockwise ( Figure 34 ).
3. Lift up on the handles and swing the hood up ( Figure
34 ).
4. Secure the prop rod.
Closing the Hood
1. Lift up on the tab securing the prop rod ( Figure 35 )
g031216
Figure 35
1. Prop-rod tab
2. Lower the hood and secure it by pushing down on the
front of the hood until it locks in place.
3. Tighten the hood-locking screw to secure the latch
(
Figure 34 ).
Opening the Rear-Access Cover
1. Remove the fastener ( Figure 36 ).
g031217
Figure 36
1. Fastener
2. Lift the rear-access cover up to access the internal
components (
Figure 36 ).
3. Lower the rear-access cover and install the fastener to
close the cover.
27