Toro 22189TE, Руководство оператора

Страница: 14 / 32

Adjusting the Cutting Height
Each wheel is adjusted individually with a wheel height
adjustment lever. Cutting heights are 1 inch (25 mm),
1-1/2 inches (38 mm), 2 inches (51 mm), 2-1/2 inches
(64 mm), 3 inches (76 mm), 3-1/2 inches (89 mm), and
3-3/4 inches (95 mm).
DANGER
Adjusting the cutting height levers could bring
your hands into contact with a moving blade and
result in serious injury.
• Stop the engine and wait for all movement to
stop before adjusting the cutting height.
• Do not put your fingers under the housing
when adjusting the cutting height.
1. Pull the wheel height adjustment lever toward the
wheel (Figure 16) and move it to the desired setting.
Figure 16
1. Wheel height adjustment lever
2. Release the wheel height adjustment lever and seat
it securely in the notch.
3. Adjust all the wheels to the same cutting height
setting.
Using the Grass Bag
Installing the Grass Bag
1. Wait for all moving parts to stop.
2. Raise and hold up the rear door (Figure 17).
Figure 17
1. Rear door
3. Install the bag on the bag mounting posts
(Figure 18).
Figure 18
1. Bag mounting posts
4. Lower the rear door.
Removing the Grass Bag
To remove the bag, reverse the steps above.
14