Toro 20955, Руководство оператора

Страница: 17 / 116

Bagging the Clippings
Use the grass bag when you want to collect grass and
leaf clippings from the lawn.
If the side-discharge chute is on the machine, remove
it; refer to
Removing the Side-Discharge Chute (page
17) . If the bag-on-demand lever is in the recycling
position, move it to the bagging position; refer to
Operating the Bag-on-Demand Lever (page 16) .
Installing the Grass Bag
1. Raise and hold up the rear deflector ( Figure 22 ).
g033379
Figure 22
1. Rear deflector 3. Grass-bag pin (2)
2. Notches (2)
2. Install the grass bag, ensuring that the pins on
the bag rest in the notches on the handle (
Figure
22 ).
3. Lower the rear deflector.
Removing the Grass Bag
To remove the bag, reverse the steps in Installing the
Side-Discharge Chute (page 17) .
Operating the
Bag-on-Demand Lever
The bag-on-demand feature allows you to either
collect or recycle grass and leaf clippings while the
grass bag is attached to the machine.
•
To bag the grass and leaf clippings , press the
button on the bag-on-demand lever and move the
lever forward until the button on the lever pops up
(
Figure 23 ).
g033491
Figure 23
1. Bag-on-demand lever (in the bagging position)
•
To recycle or side-discharge the grass and
leaf clippings
, press the button on the lever and
move the lever rearward until the button on the
lever pops up.
Important:
For proper operation, shut off
the engine, wait for all moving parts to stop,
and then remove any grass clippings and
debris from the bag-on-demand door and the
surrounding opening (
Figure 24 ) before you
move the bag-on-demand lever from 1 position
to another.
g027454
Figure 24
1. Clean here
16