Toro 20090, Руководство оператора

Страница: 9 / 20

Stopping the Engine
Release the blade control bar (Figure 16).
Important:
When you release the blade control
bar, the blade should stop within 3 seconds. If
it does not stop properly, stop using your mower
immediately and contact an Authorized Service
Dealer.
Figure 16
1. Hand-push models only 2. Self-propel models only
Recycling the Clippings
Your mower comes from the factory ready to recycle the
grass and leaf clippings back into the lawn.
If the side discharge chute is on the mower, remove it
and lock the side discharge door (refer to Removing the
Side Discharge Chute) before recycling the clippings.
Important:
Ensure that the rear discharge plug is
securely in place. Lift up the discharge deflector
and look for 2 tabs in front of the plug (Figure 17).
If you do not see them, firmly push the plug in until
it snaps into place (Figure 18).
Figure 17
1. Tabs
Figure 18
1. Discharge deflector 2. Rear discharge plug
Side-discharging the Clippings
Use the side discharge for cutting very tall grass.
Important:
Ensure that the rear discharge plug is
securely in place. Lift up the discharge deflector
and look for 2 tabs in front of the plug (Figure 19).
If you do not see them, firmly push the plug in until
it snaps into place (Figure 20).
Figure 19
1. Tabs
Figure 20
1. Discharge deflector 2. Rear discharge plug
9