Toro 140-8016, Руководство по установке

Страница: 3 / 12

2
Removing the Existing
Blades
No Parts Required
Procedure
Remove the existing blades from the spindles; refer
to the
Operator’s Manual .
3
Removing the Existing
Baffles
No Parts Required
Procedure
Note:
In the steps below, the bolts are threaded
into the mower deck. Remove the nuts first before
removing the bolts.
1. Remove the cam locks, washers, nut, and bolt
from the adjustable flow baffle (
Figure 1 ).
2. Remove the bolts and nuts securing the left
baffle (
Figure 1 ).
3. Remove the bolts and nuts securing the
discharge baffle (
Figure 1 ).
Note:
Retain the baffles and hardware for use
when changing to side-discharging mode.
g316018
Figure 1
72-inch deck shown
1. Cam lock 5. Bolt
2. Washer 6. Right adjustable flow baffle
3. Locknut
7. Discharge baffle
4. Left, front baffle
3