Installing the Transducer
g215620
Figure 3
1.
Remove the hose from the fitting on the rear control weldment (Box A of
).
g215621
Figure 4
2.
Remove and save the fitting from the rear control weldment (Box B of
).
3.
Install the tee fitting on the rear control weldment (Box C of
); torque the fitting to 301 to 336
N∙m (222 to 248 ft-lb). .
4.
Install the hose onto the tee fitting (Box D of
5.
Install the fitting (Box A of
) that was removed in step
(shown in Box B of
).
Torque the fitting to 301 to 336 N∙m (222 to 248 ft-lb).
g213032
Figure 5
6.
Install the reducer and O-rings (Box B of
); torque the reducer to 301 to 336 N∙m (222 to 248 ft-lb). .
7.
Install the transducer assembly (Box C of
) that was removed in step
of
Transducer (page 2)
.
3