manualshive.com logo in svg

Toro 137-5226, Инструкция по установке, Страница: 2 / 4

Поделиться
Скачать
Toro 137-5226 Скачать руководство пользователя страница 2

Disconnecting the Transducer

g212364

Figure 1

1.

Locate the transducer below the bulkhead, just above the fuel-tank sending unit (

Figure 1

).

2.

Disconnect the wire harness from the transducer fitting (Box A of

Figure 2

).

3.

Remove and save the transducer assembly and fitting currently installed (Box A of

Figure 2

).

4.

Install the cap onto the port (Box B of

Figure 2

); torque to 79 to 98 N∙m (58 to 72 ft-lb).

5.

Connect the existing harnesses to the new wire harness (Box C of

Figure 2

).

Important:

Do not route the wire harness near moving parts.

6.

Secure the wire harness using a cable tie.

g215301

Figure 2

2

 

Содержание 137-5226

Страница 1: ...of California to cause cancer birth defects or reproductive harm Preparing the Machine 1 Move the machine to a level surface 2 Shut off the engine and remove the key 3 Set the battery disconnect switch to the OFF position Installing the Kit Loose Parts 5x 1x 1x 1x 1x 2017 The Toro Company 8111 Lyndale Avenue South Bloomington MN 55420 Register at www Toro com Original Instructions EN Printed in th...

Страница 2: ... Box A of Figure 2 3 Remove and save the transducer assembly and fitting currently installed Box A of Figure 2 4 Install the cap onto the port Box B of Figure 2 torque to 79 to 98 N m 58 to 72 ft lb 5 Connect the existing harnesses to the new wire harness Box C of Figure 2 Important Do not route the wire harness near moving parts 6 Secure the wire harness using a cable tie g215301 Figure 2 2 ...

Страница 3: ...que the fitting to 301 to 336 N m 222 to 248 ft lb 4 Install the hose onto the tee fitting Box D of Figure 4 5 Install the fitting Box A of Figure 5 that was removed in step 2 shown in Box B of Figure 4 Torque the fitting to 301 to 336 N m 222 to 248 ft lb g213032 Figure 5 6 Install the reducer and O rings Box B of Figure 5 torque the reducer to 301 to 336 N m 222 to 248 ft lb 7 Install the transd...

Страница 4: ...o 46 to 57 N m 34 to 42 ft lb 9 Route the harness along the existing harnesses over to the transducer Figure 6 Important Do not route the wire harness near moving parts g212417 Figure 6 10 Secure the harness using the cable ties Figure 7 g215300 Figure 7 Overview of the wire harness 4 ...

Отзывы:

Нет отзывов