Toro 136-9045, Руководство по установке, Страница: 5 / 12

Mounting the Kit in Front of the Rear Tires
For 2017 and Older Machines
1. Secure the mount assembly to the console cover using 2 bolts (5/16 x 1 inch) and 2 nuts (5/16 inch) as
shown in
Figure 5 or Figure 6 .
2. Tighten the fasteners securing the upper mount to the main bracket.
3. Secure the lower support bracket to the rear side of the bracket under the console cover using 1 bolt (5/16
x 1 inch) and 1 nut (5/16 inch) as shown in
Figure 5 or Figure 6 .
Note:
You will not use the bottom hole in the main bracket or lower support bracket.
Note:
Ensure that the assembly is vertical. If it hangs at an angle, the lower support bracket may be
installed incorrectly.
g213937
Figure 5
Mounting the kit to the left side of the machine
1. Nut (5/16 inch) 3. Console cover
5. Lower support bracket
2. Mount assembly 4. Bolt (5/16 x 1 inch)
g213522
Figure 6
Mounting the kit to the right side of the machine
1. Nut (5/16 inch) 3. Console cover 5. Lower support bracket
2. Mount assembly 4. Bolt (5/16 x 1 inch)
5