Toro 136-9045, Руководство по установке, Страница: 10 / 12

Installing a Front-Weight
Kit
For Machines with 2 or More
Accessory-Mount Kits
If 2 or more accessory-mount kits (i.e., bucket kit or
universal mount kit) are added to any of the 4 locations
shown in
Figure 15 , add a front-weight kit. Contact
your Authorized Service Dealer for the front-weight kit.
g037417
Figure 15
1. Add a front-weight kit when 2 or more accessory-mount kits
are installed at these positions.
Operation
Mounting Attachments
Use only Toro-approved attachments and accessories.
The maximum capacity is 11.3 kg (25 lb).
Use the holes in the mounting brackets to secure
attachments or accessories.
Mounting a Bucket
1. Loosen the knob and raise the top bracket.
Tighten the knob to hold it in place (
Figure 16 ).
2. Place the bottom lip of the bucket over the
bottom ledge of the welded support bracket
(
Figure 16 ).
3. Loosen the knob and lower the top bracket as far
as possible over the rim of the bucket. Tighten
the knob (
Figure 16 ).
g037421
Figure 16
Fist clamp not shown
1. Knob 3. Bottom ledge of the
support bracket
2. Top bracket over the rim of
the bucket
10