Toro 136-0372, Руководство по установке

Страница: 46 / 64

Installing the Section Bypass
Hose—Machines with the Optional
Spray Gun Kit or the Optional Electric
Hose Reel Kit
1. Assemble the bypass shutoff valve to the quick-connect
socket of the bypass manifold (
Figure 99 ) with the small
retainer that you removed in step 1 of Repositioning
the Section Bypass Valves (page 40) .
Note:
Ensure that the handle of the bypass shutoff
valve is aligned as shown in Figure 99 .
Figure 99
1. Bypass
manifold—quick-connect
socket 4. Retainer (small)
2. Bypass shutoff valve 5. Section bypass hose—2.5
x 146 cm (1 x 57-1/2
inches)
3. 90° quick-connect fitting
2. Assemble the 90° quick-connect fitting of the section
bypass hose—2.5 x 146 cm (1 x 57-1/2 inches) onto
the quick coupling of the bypass shutoff valve with the
retainer (small) that is supplied with the section bypass
hose (
Figure 99 ).
3. Route the section bypass hose around the right frame
channel toward the bulkhead fitting in the sprayer tank
as shown in
Figure 100 .
Figure 100
1. Retainer (large) 3. Bulkhead fitting (sprayer
tank)
2. 90° barbed fitting 4. Section bypass hose
4. Assemble the 90° barbed fitting of the section bypass
hose into the bulkhead fitting (
Figure 100 ).
5. Secure the 90° fitting to the bulkhead fitting ( Figure
100 ) with the retainer (large) that you removed in step
1 of Removing the Section Bypass Hose (page 16) .
46