Toro 136-0372, Руководство по установке

Страница: 13 / 64

Removing the Boom-Section Valves,
Supply Hoses, and Section-Valve
Mount
1. Remove the 4 flange-head bolts (5/16 x 3/4 inch) that
secure the section-valve bracket to the section-valve
mount (
Figure 18 ).
Note:
Retain the flange-head bolts for installation in
Installing the Section Valve Manifold (page 24) .
Figure 18
1. Bracket (section-valve) 2. Flange-head bolt (5/16 x
3/4 inch)
2. Lift the boom-section valves, supply hoses, and
section-valve bracket from the machine (
Figure 19 ).
Note:
You no longer need the valves, hoses, and
bracket.
Figure 19
6
Removing the Agitation
Nozzles
No Parts Required
Removing the Agitation Nozzles from
the Sprayer Tank
1. Remove the 3 retainers that secure the agitation nozzles
to the bulkhead fittings at the left side of the sprayer
tank (
Figure 20 ).
Note:
Retain the retainers for installation in 13
Installing the Agitation-Nozzle Assembly and Hoses
(page 30)
.
Figure 20
1. Bulkhead fitting 3. Retainer
2. Agitation nozzle
2. Remove the agitation nozzles from the bulkhead
fittings (
Figure 20 ).
13