Form No. 3369-722 Rev A
Oil Cooler Kit
Greensmaster
®
3400 Series Traction Unit
Model No. 117-9314
Installation Instructions
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
1
No parts required
–
Drain the hydraulic oil tank.
Oil cooler
1
Hydraulic hose assembly
1
Cooler hose
1
Temperature sender
1
Adapter
1
90-degree elbow fitting
1
Sealing grommet
1
Bushing
1
Double R-clamp
1
Clip
5
Cooler tab
2
Upper cooler bracket
2
Lower cooler bracket
2
Shoulder bolt
2
Hex-head screw (1/4 x 5/8 inch)
9
Spring washer
2
Flange nut (3/8 inch)
2
Hose clamp
4
2
Cable tie
2
Install the fittings and route the hoses.
© 2011—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved