Toro 08712, Руководство оператора

Страница: 9 / 24

pin assemblies to the adapter plates with 2
thread-forming screws.
Note:
Position the components as shown in
Figure 12 .
g003787
Figure 12
1. Push arm tube 3. Pin assembly
2. Adapter plate 4. Thread-forming screw
3. Insert a cylinder pin into each push arm tube as
shown in
Figure 13 .
4. Insert the push arm tubes onto the right and left
plow plates aligning the cylinder pin guides with
the holes in the plow plates (
Figure 13 ).
Note:
If unable to get the push arm tubes
around the plow plates, loosen the nuts securing
the plow plates to the caster fork.
5. Mount each cylinder pin to each plow plate
with a bolt (5/8 x 1-1/2 inches) and a washer
(1.68-inch outside diameter x 0.65-inch inside
diameter) as shown in
Figure 13 .
Note:
Torque the bolts to 203 N-m (150 ft-lb).
g003666
Figure 13
1. Cylinder pin 2. Push arm tube
6. Mount the top of the hitch frame to the hitch
frame bracket with 2 bolts (3/8 x 2 inches) and
nuts (
Figure 14 ).
7. Mount the hitch frame tubes to the plow plates
with bolts (3/8 x 1-1/2 inches) and nuts (
Figure
14 ), and tighten the fasteners.
g018349
Figure 14
1. Hitch frame bracket 3. Hitch frame tube
2. Hitch frame
8. Secure the frame adapter to the hitch frame with
a tube, a clevis pin, and a cotter pin (
Figure 15 ).
g018307
Figure 15
1. Frame adapter 3. Clevis pin with grease
fitting
2. Tube
9