Toro 08712, Руководство оператора

Страница: 1 / 24

Form No. 3448-319 Rev A
Front Lift Frame
Sand Pro ® /Infield Pro ® 5040 Traction Unit
Model No. 08712—Serial No. 311000336 and Up
Operator's Manual
This product complies with all relevant European directives. For details, please see the Declaration of
Incorporation (DOI) at the back of this publication.
Note:
Determine the left and right sides of the machine from the normal operating position.
Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure Description Qty. Use
1
No parts required
–
Prepare the machine.
2
No parts required
–
Remove the shrouds.
3
No parts required
–
Straight hydraulic fitting with O-ring 2
90° hydraulic fitting with O-ring 2
Lift valve 1
Valve plate 1
Bolt (1/4 x 3 inches) 3
Locknut (1/4 inch) 3
Bolt (#10 x 1-1/4 inches) 2
Locknut (#10) 2
4
Lift lever
1
Install the lift valve (Model 08705).
Straight hydraulic fitting with O-ring 2
90° hydraulic fitting with O-ring 2
Lift valve 1
Valve plate 1
Bolt (1/4 x 3 inches) 3
Locknut (1/4 inch) 3
Bolt (#10 x 1-1/4 inches)
2
Locknut (#10) 2
5
Lift lever 1
Install the lift valve (Model 08745).
Right plow plate 1
Left plow plate 1
Bolt (1/2 x 2 inches) 4
Locknut (1/2 inch) 4
Hitch frame bracket
1
6
Bolt (1/2 x 1-3/4 inches) 2
Install the plow plates.
© 2021—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3448-319*