Filtering the Closed-Loop Traction Circuit (continued)
CAUTION
Use extreme caution when performing this test. The wheels will be
rotating during the test.
IMPORTANT
While engaging the traction circuit, monitor the indicator on the high
flow hydraulic filter. If the indicator should show red, either reduce
pressure on the traction pedal or reduce engine speed to decrease
hydraulic flow through the filter.
8. With engine running at low idle speed, select the FORWARD direction and
slowly depress the traction pedal to allow flow through the traction circuit
and high flow filter. Keep traction circuit engaged for five (5) minutes while
gradually increasing both forward pressure on traction pedal and engine
speed. Monitor filter indicator to make sure that green color is showing
during operation.
IMPORTANT
If using a hydraulic filter that is not bidirectional, do not select
reverse or operate the machine in the reverse direction. If flow is
reversed when using a filter that is not bidirectional, debris from the
filter will re-enter the traction circuit.
9. With a bidirectional hydraulic filter installed and the engine running at high
idle speed, alternately select forward and reverse direction. Continue this
process for an additional five (5) minutes while monitoring filter indicator.
10. Shut the engine OFF and remove the key from key switch.
11. Remove the temporary hydraulic filter from the machine and install any
disconnected hydraulic hoses or tubes; refer to
and Tubes (O-Ring Face Seal) (page 5–8)
.
12. Lower machine to ground.
13. Check the hydraulic fluid level in the tank and adjust as necessary; refer to
the traction unit
Operator’s Manual
.
14. Operate the machine and check for leaks before returning the machine to
service.
Outcross 9060
Page 5–57
Hydraulic System: Service and Repairs
18234SL Rev B
Содержание 07511AA
