Toro 03781, Руководство оператора

Страница: 45 / 76

•
Lift arm pivot bushings (1 per cutting unit),
refer to
Figure 71
•
Cutting unit carrier frame (2 per cutting unit),
refer to
Figure 71
•
Cutting unit lift arm pivot (1 per cutting unit),
refer to
Figure 71
g015158
Figure 71
Engine Maintenance
Engine Safety
•
Shut off the engine before checking the oil or
adding oil to the crankcase.
•
Do not change the governor speed or overspeed
the engine.
Checking the Air Filter
Service Interval: Before each use or daily
1. Prepare the machine for maintenance; refer to
Preparing for Maintenance (page 41) .
2. Open the hood; refer to Opening the Hood (page
41) .
3. Check the service indicator at the end of the air
filter housing (
Figure 72 ).
Note:
If a red band displays in the service
indicator, change the air filter; refer to Removing
the Filter (page 46) .
g371114
Figure 72
1. Service indicator
4. Squeeze the dust-ejector valve ( Figure 73 ).
45