Toro 02858, Руководство по установке

Страница: 6 / 16

6. Assemble the retainer of the dust cap onto the
quick-connect fitting (
Figure 12 ).
Note:
You will install the cap over the fitting in
Installing the Dust Cap (page 13) .
Preparing to Test the
Hydraulic Pressure
Model 31654
Installing the Quick-Connect
Fitting
Machines with the Optional Road Light Kit
1. At the right side of the traction pump, remove
the 3-pin connector labeled
BRAKE PRESSURE
SENSOR
from the brake-pressure transducer
( Figure 13 ).
g344293
g344324
Figure 13
1. Brake-pressure
transducer 2. 3-pin connector (labeled
BRAKE PRESSURE SENSOR
)
2. Remove the brake-pressure transducer from
the adapter at T-fitting of traction pump port-B
(
Figure 14 ).
g344291
Figure 14
1. Adapter fitting
(T-fitting—traction pump
port-B) 2. Brake-pressure
transducer
3. Assemble the quick-connect fitting into the
adapter fitting (
Figure 15 ).
g344321
Figure 15
1. Adapter fitting 2. Quick-connect fitting
4. Torque the quick-connect fitting to 27 N∙m (20
ft-lb).
5. Assemble the test equipment onto the
quick-connect fitting (
Figure 16 ).
6