Toro 02858, Руководство по установке

Страница: 5 / 16

5. Torque the quick-connect fitting to 27 N∙m (20
ft-lb).
6. Assemble the retainer of the dust cap onto the
quick-connect fitting (
Figure 9 ).
7. You will install the cap over the fitting in Installing
the Dust Cap (page 11) .
Installing the Quick Connect
Fitting
Models 31657 and 31659
1. At the right side of the traction pump, remove the
plug from port-MB of the traction pump (
Figure
9 and Figure 11 ).
g343559
Figure 10
g344078
Figure 11
1. Port-MB (traction pump) 3. Reducer fitting (3/4 x 7/16
inch)
2. Plug
2. Assemble the reducer fitting (3/4 x 7/16 inch)
into port-MB of the traction pump (
Figure 11 ).
3. Torque the reducer fitting to 81 N∙m (60 ft-lb).
4. Assemble the quick-connect fitting into the
reducer fitting (
Figure 12 ).
g344075
Figure 12
1. Reducer fitting 3. Dust cap
2. Quick-connect fitting
5. Torque the quick-connect fitting to 27 N∙m (20
ft-lb).
5