Toro 02617, Руководство пользователя

Страница: 9 / 152

Assembling the Upper and Lower
Handlebars
1. Align the holes on the upper handlebar with the
holes in the lower handlebar (
Figure 8 ).
g364684
Figure 8
1. Lower handlebar 4. Upper handlebar
2. Knob 5. U-bolt
3. Washer (6 mm)
2. Assemble the upper handlebar to the lower
handlebar wit the 2 U-bolts, 2 washer (6 mm),
and 2 knobs.
Assembling the Cable to the
Operator-Presence Bail
1. Insert the fitting at the end of the cable sheath
into the upper socket of the handlebar fitting
(
Figure 9 ).
g367356
Figure 9
1. Handlebar fitting 2. Fitting (cable sheath)
2. Squeeze the leg of the operator-presence bail
until you can remove it from the upper handlebar,
and remove the bail from the machine ( Figure
10 ).
g367353
Figure 10
3. Insert the cable fitting through the hole in the
bracket of the operator-presence bail as shown
in
Figure 11 .
g367355
Figure 11
1. Bracket
(operator-presence bail) 2. Cable fitting
4. Insert the end of the operator-presence bail into
the handlebar, squeeze the other leg of bail
slightly, and insert the bail into the handlebar
(
Figure 12 ).
7