tornos MultiAlpha 6x32 Скачать руководство пользователя страница 26

Страница: 26 / 90

2. Individual protection - Safety instructions MultiAlpha 6x32

300940 en - 03/11

2-6

2.3.2.

Technician maintenance

2.3.2.1

Skills

Warning !

The maintenance must be performed by a specialist who has taken a TORNOS
SA training course.

Danger !

The replacement of a spindle belt or axis must be performed by a TORNOS SA
technician.

Danger !

Only a qualified person is authorised to work inside the electrical cabinets or on
electrical parts.

Danger !

Any work performed on a

component or assembly under pressure

presents a sig

nificant danger.

These tasks can only be performed by persons trained especially for this.

The

fire extinguishing system

is particularly affected by this caution !

For further information about maintenance, see the

Operating instructions

300652

and

Maintenance manual 300643

2.3.2.2

Parts

Warning !

The maintenance must be performed with original spare parts conforming to
TORNOS SA specifications.

Caution !
TORNOS SA

disclaims all responsibility for any modifications carried out by the

customer to the machine, and to its related equipment and software, without
agreement ratified by

TORNOS SA

Caution !

Change the belt when, (its condition has visibly deteriorated) if:
- a notch is cracked.
- a notch is broken.
- the protective strip is damaged.
- the steel cords appear at the side.

Содержание MultiAlpha 6x32



























































































Результаты поиска

Содержание MultiAlpha 6x32

Отзывы:

Похожие инструкции для MultiAlpha 6x32

Бренды по названию

Популярные бренды

tornos MultiAlpha 6x32, Инструкции по безопасности

Результаты поиска

Содержание MultiAlpha 6x32

Отзывы:

Похожие инструкции для MultiAlpha 6x32

Бренды по названию

Популярные бренды