tornos EvoDECO 10/10, Инструкция по эксплуатации

Страница: 29 / 38

Instruction Manual - EvoDECO 10/10 & 10/8 - 2. Installation
298061_en - 07/12
2-7
2.6.1.2. Connection via an autotransformer.
Fig. 3
Starting condition - Machine in place and stabilised.
Step Key Action / Observation
1. Disconnect the autotransformer (5) from the local mains electrical
installation (4).
• This is to be carried out by a qualified and authorised member of
staff.
2. Connect the autotransformer mains cable (3) on the machine
terminal block (1).
• Minimum cable cross-section 6 mm²
• See
figure 3 below.
3. Reconnect the autotransformer (5) to the local mains electrical
installation (4).
4. Turn the main switch (2) "ON".
5. Check the rotating field.
6. Check the voltage at the socket.
• 220-240 V (Europe).
• 100-110 V (US).
(1)
(2)
(3)
(5)
(4)