9
BELT MAINTENANCE
(WARNING : REMOVE LP TANK BEFORE TURNING OVER THE MACHINE)
To change a broken or worn belt, turn the machine on its side and remove the pad and pad
driver. NOTE: look for the, “THIS SIDE UP” decal on the side of the machine. The Honda
engine can only be tilted on one side due to its carb filter location. Using a wrench, loosen
the hex bolt for the pulley tensioner. Once the tensioner is loose, the belt can be easily
removed. Slip the old belt off the pulleys and reattach the new belt. Attach the pulley
tensioner back into position and retighten its bolt. The tensioner should provide the belt with
a 0.16 inch belt deflection when a force of 2 pounds is applied against outside of belt. Turn
machine upright immediately after the service is completed.
Maintenance Table :
Type of Service
Daily
First
Every
Every
Every
Every
Every
20 Hrs. 50 Hrs. 100 Hrs. 300 Hrs. 500 Hrs. 1000 Hrs.
Check Oil Level
*
Check Bonnet Air Filter for Dirt
*
Check Engine Cooling Fins
*
Check Cleaning Pad
*
Check Belt Tension
*
Check Carb Filter
*
Change Engine Oil ++
*
*
Inspect Bolts & Connections
*
*
Clean and Adjust Spark Plug
*
Change Oil Filter
*
*
Replace Carb Filter
*
Adjust Engine Valve Clearance
*
Replace Spark Plugs
*
Clean Cylinder Heads of Deposit
*
++ MOTOR OIL : SAE 10W30
OIL CAPACITY 1.1 QTS GXV340 11HP
OIL CAPACITY 1.5 QTS GXV390 13HP
