5
WARNING:
Do not put hands under base - rotating parts could cause injury. Always keep hands feet
and loose fitting clothing away from moving parts to prevent possible injuries. Use care to
keep any electrical supply from contacting moving parts, such as floor brushes or pads.
x
Do not use machine in areas where flammable and/or explosive vapors or dust are
present.
x
Never use a device to lock the switch lever in the “ON” position.
x
Do not add weight to this machine - this will upset the balance and may cause motor
overload.
x
Pad holders and brushes must be properly maintained to insure maximum cleaning
results.
x
To avoid fire, do not use with a flammable or combustible liquid to clean a floor.
x
Risk of explosion. Floor sanding can result in explosive mixture of fine dust and air.
Use this machine only in a well ventilated area, free from any flame or match.
x
Do not add weight.
x
Do not store with brush, pad holder or pad on floor.
x
Refer to this manual for additional instructions.
SAVE THESE INSTRUCTIONS
Machine Specifications:
Pad Size
24”
Pad Speed
2000 RPM
Width
26.5”
Length
46”
Engine
Honda GXV390
Starting Voltage
110 Volts
Deck Material
Cast Aluminum Alloy
