Tornado 2440 ANNEX A, Руководство пользователя

Страница: 5 / 58

INSTALLING THE ROUTER
Connect the ADSL Line and Telephone
An RJ-11 cable will be connected to the wall phone jack and the line-end of
the splitter. Connect another RJ-11 phone wire from the modem-end of the
splitter to the port labeled “line” on the router. A third RJ-11 phone wire will be
needed to connect the telephone to the phone-end of the splitter.
NOTE: See connections on the installation d agram. i
Connect the PC to the Router
•
Use the Ethernet cable to connect your computer directly to the router.
Connect one end of the Ethernet cable to one of the ports labeled LAN
on the rear panel of the router and connect the other end to the
Ethernet port of your computer. Attach any additional PCs to the
router using RJ-45 cables to the port labeled LAN on the rear panel of
the router.
Connect the Power Adapter
Complete the process by connecting the AC power adapter to the POWER
connector on the back of the device and plug the adapter into a wall outlet or
power strip. Then turn on and boot up your PC and any LAN devices, such
as hubs or switches, and any computers connected to them.
- 4 -