Tornado 2-100 H Professional, Руководство по эксплуатации и техническому обслуживанию

Страница: 4 / 24

Inspection
Unpack and inspect your extractor for shipping damage. Each unit is tested and inspected prior to
shipping. For any concerns regarding shipping damage, contact your dealer immediately. All returns
must have a Return Authorization (RA) number.
Grounding Instructions
The extractor MUST BE GROUNDED . If the machine should stop working or malfunction, grounding
offers a path of least resistance for electrical current, reducing the risk of electrical shock. This
machine is equipped with a cord that has an equipment grounding conductor and a grounding plug.
The plug must be inserted into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances. Cutting off the ground wire or using a cord that is not
properly grounded will void the manufacturers warranty on this machine.
Safety
Warning - To reduce the risk of fire, electrical shock or Injury:
•
READ ALL INSTRUCTIONS BEFORE USING.
•
Use only as described in this manual.
•
Plug power cord Into the nearest outlet (20A preferred).
•
Never attempt any adjustments or repairs while the machine is plugged in.
•
Do not use outdoors, in standing water, or on wet surfaces.
•
Pay close attention when using unit near children.
•
Do not leave unit outdoors, or in extreme heat or cold. Harsh weather elements will damage
components and void warranty.
•
Lift using only the appropriate handles.
•
Always wear appropriate clothing and safety equipment when operating unit.
•
Keep all body parts, hair, and loose clothing away from openings and moving parts
•
Use extra care when cleaning on stairs. Do not move up or down stairs with fluid in the unit.
•
Use common sense to protect yourself and others from injury when using an extractor.
Warnings
•
Do not run the pump without water in the solution tank.
•
Do not use hot liquids in the solution tank.
•
Do not pick up combustible or flammable materials.
•
Do not use your extractor with a damaged cord.
•
Do not operate without the float shut-off assembly in place.
Precautions
•
Do not run the pump dry. This will void the manufacturer warranty.
•
Do not run hot fluids through the pump. This can cause pump cavitation and will void the warranty.
This is a water-cooled pump.
•
Always be sure the solution tank and hoses and filters are clear of debris. Running the pump with
clogged filters or hoses can cause pump damage.
•
Replace any damaged cords or hoses before use.
Chemical Use
•
Only use chemicals approved for use with extraction.
•
Keep the appropriate MSDS sheets on hand at all times.
•
Flush the solution pump with clean water after each use to extend the life of the pump.