Tormach PSG 612, Руководство оператора

Страница: 16 / 36

4. Firmly grasp the grinding wheel with one hand and
remove the hub. If the wheel spins freely, you will
need to hold the wheel in one hand while you insert
the spindle wrench in the slot on the back side of the
spindle motor.
note: You may need to lightly tap the hub in order to
remove the tapered hub from the spindle shaft.
5.
Pull the hub and wheel back and away from the
grinder.
6. Ensure the inside of the hub is clean and free from
debris. A clean finger works best for this job.
7.
Also ensure the spindle taper is wiped clean.
8.
Gently place the new wheel onto the spindle and
install the nut, keeping in mind it is a left-hand thread.
9. Hold the wheel in one hand and tighten it down with a
spanner wrench.
note: You may need to re-insert the spindle wrench
in the slot on the back side of the spindle motor. Do
not over tighten.
10. Replace the cover and the socket head cap screws.
RING TEST
Lightly tap the circumference of the grinding wheel with
a metal object (a wrench works fine). Listen for consistent
ringing sounds. There should be no dead tones as you tap
in several locations around the wheel.
CAUTIOn: THE GRInDInG WHEEl
SHOUlD BE PROPERlY BAlAnCED
AnD DRESSED BEFORE FIRST USE.
UM10159_PSG612_OPERATORS_MAnUAl_0718A
14 15
UM10159_PSG612_OPERATORS_MAnUAl_0718A