TROUBLESHOOTING
Problem
The console screen turns on, but is scrambled or illegible.
Cause
The BIOS isn't configured for the correct screen output.
Solutions
You Might Need
To...
Probability
How-To Steps
Need More?
Configure the
display output
settings in BIOS.
High
1. Connect a VGA monitor
to the console.
2. Power the console on and
select the
Delete
key to
enter the BIOS.
3. From the
Advanced
tab,
select
Display
Configuration
.
4. Configure the display as
follows:
l
Primary IGFX Boot
Display:
Auto
l
LCD Panel Type:
1280x1024 LVDS
l
Panel Channel:
Dual
Channel
l
Panel Color Depth:
24
Bit
5. Select the
Esc
key, go to
Save and Exit
, and select
Save Changes and Reset
.
This configuration problem can occur if your
console has a CMOS battery failure. Replace
the battery if it reoccurs.
Page 20
©Tormach® 2021
Specifications subject to change without notice.
tormach.com
TD10715: Installation Guide: PathPilot Operator Console for 770 (0821A)
