MOUNT THE CONSOLE
4. With the aid of another person, loosely attach the opposite side of both split collars to the mount arm using
a 8 mm hex wrench.
Figure 14: Loosely attaching the split collars to the mount arm.
5. Find the keyboard tray that you set aside earlier. Then, attach it to the bottom of the controller, as shown in
the following image.
Figure 15: Attaching the keyboard tray to the bottom of the controller.
6. Loosely attach the opposite side of the split collar to the mounting arm using a 8 mm hex wrench.
7. Adjust the height and the angle of the console assembly as required.
8. Securely tighten all four split collars using a 8 mm hex wrench. Securely tighten all mount arm brackets
using a 2.5 mm hex wrench.
Page 12
©Tormach® 2021
Specifications subject to change without notice.
tormach.com
TD10715: Installation Guide: PathPilot Operator Console for 770 (0821A)
