1. Identify the oil fittings on the rotary table.
OIL POINT
OIL PLUG
OIL SIGHT
GLASS
OIL POINT
Figure 5-13: Oil fittings on a standard rotary table.
OIL POINT
OIL POINT
OIL POINT
OIL POINT
OIL POINTS
Figure 5-14: Oil fittings on a tilting rotary table.
OIL POINTS
OIL POINTS
Figure 5-15: Oil fittings on a super spacer rotary table.
2. On the standard rotary tables (6-in. Rotary Table or 8-in.
Rotary Table), identify the oil reservoir.
3. Use a trigger-style oil can to fill the oil fittings: Insert the tip
of the oil can into each fitting, and pump in oil until you can
feel back pressure.
4. On the standard rotary tables (6-in. Rotary Table or 8-in.
Rotary Table), fill the oil reservoir until the oil begins to leak
out at the bottom of the table. If the If the oil reservoir is
over-filled, it slowly leaks out until it reaches the correct level.
5. Put the rotary table on a stack of newspaper (or similar) to
allow it to drain the excess oil.
Page 13
©Tormach® 2019
Specifications subject to change without notice.
tormach.com
TD10552: Owner's Guide: 4th Axis (0919A)
TECHNICAL DOCUMENT
