Torklift C2213, Руководство по установке, Страница: 6 / 17

6
Locate the driver’s side front bed cross member perch. Remove the factory bolt
from the perch and bed cross member (keep the factory bolt handy).
SEE
PHOTO 3.1
PHOTO 3.1
STEP 4
Locate the driver’s side tie down and insert the bolt fisher end
through the left hole in the tie down. Place the tie down against
the frame and placing the upper support strap on the tie down up
into the bed cross member perch. Replace the factory bed cross
member bolt and hand tighten. Remove the bolt fisher from the
1/2” -13 x 2” GR5 hex bolt and install one 1/2” GR5 flat washer,
one 1/2” GR5 lock washer and one 1/2” -13 GR5 hex nut.
SEE
PHOTO 4.1 & 4.2