Torklift C2213, Руководство по установке, Страница: 11 / 17

11
TORKLIFT’S BOLT FISHING GUIDE
Your guide to understanding the installation of our frame mounted tie downs.
Note: The hardware may vary as to
-Coiled End of Bolt Fisher-
what is being fished along with the
bolt. In this instance a 1” X 2” plate
washer is being fished along with
the hex bolt. Different applications
may require fishing through various
star washers and flat washers for
example.
Desired Hole on Vehicle (Place the coiled end of the bolt fisher through this
hole).
This side of the Bolt Fisher should come
out of a hole where the required hardware
(for example
1” X 2” plate washer) can pass through.
This bottom exa
mple shows the bolt when it’s completely fished through
the vehicle. You may find it easier to keep the bolt fisher attached until
you get the tie down receiver in place so that the bolt doesn’t fall into the
vehicle frame.
WARNING: PULLING TOO HARD ON THE BOLT FISHER CAN RESULT IN
LOST FASTENERS, OR BROKEN BOLT FISHER.