Press MODE key till display shows
Unit is ready to be programmed for starting
MONTH and DATE for season 1.
Press MONTH and DATE keys to set MONTH and
DATE for starting of season 1. Press ENTER.
Display now shows
Use MONTH and DATE key to set ending MONTH
and DATE for season 1. Press ENTER.
Set the start and end for other 3 seasons if
desired.
To delete an entry, press DLETE key.
NOTE: If for any reason you set starting MONTH and
DATE and forget to set ending MONTH and DATE,
that season becomes invalid. Unit will erase the start-
ing date.
5.0 SET INDIVIDUAL HOLIDAY DATES
Press MODE key until display shows
1
SEASON
5
1
SEASON
H
NOTE:
A total of 24 individual holiday dates can be set. Each
holiday is set by MONTH and DATE. The same sched-
ule will repeat on every holiday date.
Press MONTH key to advance to desired month.
Press DATE key to advance to desired date.
Press ENTER. Now display shows
This means unit is ready to accept 2nd holiday date.
Use same procedure to set more holidays.
To delete a holiday date press the DLETE key.
Press ENTER.
6.0 TO SET SIGNAL DURATIONS FOR EACH
CHANNEL
If you do not require any signal settings proceed to
section 7.0 by pressing mode key.
Press MODE key till display shows
This means unit is ready to accept signal duration
(in SEC). for CH1, SIG1. (SIG1 or SIG2 can be set
from 1 sec. to 99 sec.).
If you do not want CH1 as a signal timer, then
select channel 2 by pressing SELCT key. Or, you
can set both channels for signal durations.
After selecting proper channel, press SIG/SEC
key to set signal 1 duration to desired number of
seconds. Press ENTER.
6
H
SIG 1
CH 1
