EMERGENCY LOWERING OF BACKSTOP IN CASE
OF POWER FAILURE
If the winch is not able to be used because of a power failure,
etc., it is possible to turn the winch manually to lower the
backstop. The winch motor comes standard with a 1/2” hex on
the end of the shaft at the back of the motor. Use a 1/2” socket
and cordless drill or hand tools over the hex shaft. Turning
the shaft clockwise will slowly lower the backstop.
PLEASE NOTE:
The limit switches will not stop
this winch if operated manually
through motor shaft. Take care
not to drive the winch past the
lower limit switch as this will
damage the limit switch and
require repair.
P: 1-866-829-4411
E: [email protected]
F: 1-519-539-9191
USA: Tork Winch USA LLC
5020 Hazel Jones Road
Bossier City, LA | 71111
CANADA: Tork Winch
125 Bysham Park Drive
Woodstock, ON | N4T 1P1
INSTALLATION INSTRUCTIONS
TW 2000 BASKETBALL BACKSTOP WINCH
GYMNASIUM
If you encounter any difficulties installing or servicing your TW 2000 Backstop Winch,
contact your dealer or call Tork Winch directly at: 1-866-829-4411
TW 2000 DETAILS AND DIMENSIONS
∙
Sizes of wall masonry boxes required
for single and ganged key switches.
All boxes 2" (w) x 3 3/4" (h) x 2 1/2" (d).
∙
This figure outlines the dimensions
of the single gang key switch.
(Part #K-SK13710)
∙
Note: For 220V models, a DPDT
key switch is required.
(Part #39000420)
1 HP 115V