Version 1.0
©Copyright 2014, Torinnov. All Rights Reserved and Patented Products.
Page 3
5.
Initial Set Up
The LCD displays status icons, as shown in Figure 1.
Figure 1
The following table provides the sequence of events during initial set up. The IR sensor(s) on the clock face
must not be exposed to direct sunlight during initial startup. Thus, perform the start up in a shady location. If the
RF sensor fails, the LCD will display “KE”.
Steps
LC-Display
Description
Hour:minute clock
hand initialization
HM (hour:minute) and the WAIT symbol ( ) flashes
and the clock hands move to the reception search
position (08:05)).
Please wait…
Month clock hand
initialization
MO (month) and the WAIT symbol ( ) flashes and
the clock hands move to the reception search position
(December), if this hand is available with your clock.
Please wait…
Date clock hand
initialization
DA (date) and the WAIT symbol ( ) flashes and the
clock hands move to the reception search position
(31st), if this hand is available with your clock.
Please wait…
Week clock hand
initialization
WK (week) and the WAIT symbol ( ) flashes and the
clock hands move to the reception search position
(Sunday), if this hand is available with your clock.
Please wait…
