Torin BIG RED T71001L Скачать руководство пользователя страница 22

22 

 

 

REPLACEMENT PARTS   

Consumers for replacement parts and technical questions call us Monday 

– Friday between 8am and 

5:00pm EST at 1-888-448-6746. 

www.torinjacks.com 

 

Please contact our Customer Service Department with any questions you may have concerning parts, 

use, or maintenance. Not all equipment components are available for replacement, but are illustrated as 

a convenient reference of location and position in the assembly sequence. Contact Customer Service for 

equivalent component. 

When you contact us, please have your Product’s Model number, Serial Number 

and Description ready so that we may help you efficiently. This information can be found on a sticker on 

the product. 

 

The manufacturer or distributor reserves the right to make design changes and or improvements to 

product lines and manuals without notice.   

 

ONE YEAR LIMITED WARRANTY   

All products sold are felt to be of the highest quality and are covered by the following warranty:   

With proof of purchase for a period of one year from the date of that purchase, the manufacturer will 

repair or replace, at its discretion, without charge, any of its products or parts thereof which fail due to a 

defect in material or workmanship.   

This warranty does not cover damage or defects caused by improper use, careless use or abuse of the 

equipment. This warranty does not cover parts normally considered to wear out or be consumed in the 

normal operation of the equipment.   

Except where such limitations and exclusions are specifically prohibited by applicable law,(1) the 
CONSUMER’S SOLE AND EXCLUSIVE REMEDY SHALL BE THE REPAIR OR REPLACEMENT OF 
DEFECTIVE PRODUCTS AS DESCRIBED ABOVE, and (2) THE MANUFACTURER SHALL NOT BE 

LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGE OR LOSS WHATSOEVER, and (3) 

THE DURATION OF ANY AND ALL EXPRESSED AND IMPLIED WARRANTIES, INCLUDING, 

WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 

PARTICULAR PURPOSE, IS LIMITED TO A PERIOD OF ONE YEAR FROM DATE OF PURCHASE. 

 

 

   

 

_____________________________________________________________________________ 

 

Distributed by Torin Jacks, Inc. 4355 E. Brickell St. Ontario, CA 91761 USA

 

Содержание BIG RED T71001L























Отзывы: