Page 1 of 26
1. Application
This high-resolution color display with touch screen use is
specifically designed to meet the rigorous performance standards needed
for diagnostic, interventional radiology, and other medical applications.
To guarantee image integrity, features include accurate signal
conversion and a wide range of interfacing options.
Compact design -Low weight and small size with improved performance make
the color flat panel display HL1916S SERIAL preferable to conventional
CRT monitors.
Embedded LUT(Look Up Table )-This monitor is factory calibrated to
achieve Gamma2.2 compliance and Linear gray level reproduction at the
factory set point. Six different settings are stored within the display.
Screen resolution- HL1916S SERIAL is equipped with a panel with Twisted
Nematic technology. The optimal picture resolution is 1280 x 1024 pixels.
Video signals with other resolutions typical to medical engineering are
optimally zoomed in or out to the screen size.
Fast backlight stability- The luminance stabilization circuit employs
a built in photo sensor to keep the back-light lamps at a constant
luminance for consistent calibration over the life of the display and
can control the back light system automatically to extend the life of
the monitor
Multi-interface for video inputs- Support DVI-D, VGA, DisplayPort.
Embedded full functional stand base - The stand base is embedded inside
the monitor and can be easily removed. The stand base is up/down and tilt
adjustable.
2. Declarations
Safety precautions
WARNING
:
To avoid risk of electric shock, this equipment must only be connected
to a supply mains with protective earth.
Medical Equipment
With respect to electric shock, Fire and mechanical
hazards only in accordance with ANSI/AAMI
ES60601-1:2005
＆
CSA C22.2 No.60601-1:2008
