Page 9 of 26
display is adapted using an OSD menu.
DVI-D connection: The connection to the computer can also be made via
the digital single link. The picture quality, noise immunity and
radiated interference of the complete system depend on the cable
quality and length.
DP connection: The connection to the computer can also be made via the
DisplayPort connection. The picture quality, noise immunity and
radiated interference of the complete system depend on the cable
quality and length.
Serial connection: you can connect the display via the RJ11 connector
to the computer for firmware updating.
4.1.3 Stand base (attaching)
Put the stand base near VESA holes of the monitor. Fasten the stand
base with four M4x12 screws.
Move the button of stand base towards the right, and lift the monitor,
and then turn the monitor by 90 degrees.
