4
1.
Safety Instruction for Unpacking and Installation
Be sure to wear safety gear such as rubber gloves and safety glasses
for unpacking. The membrane is packaged in sodium hypochlorite
solution (Max. 200 mg/L of chlorine). If the solution happens to splash
onto the skin, wash the affected part with running water. If the solution
happens to get in the eyes or mouth, wash the affected part with
sufficient amounts of clean running water for more than 15 minutes and
see the doctor immediately.
Be sure to wear safety gear such as a helmet and safety shoes to avoid
injury due to falling of the modules.
The preservative solution should be drained out before using the
modules. After that, keep clean water in the modules to prevent the
hollow fiber membrane from drying out. Do not allow the modules to
dry even for a few hours.
The membrane modules should not be frozen.
Be careful not to damage or dent the modules during handling.
Be sure to wear protective gloves to avoid injury of hands by packing
box of the modules.
!
!
Instruction
!
!
Instruction
Prohibited
Prohibited
Prohibited
!
!
Instruction
