©2020 TopXGun (Nanjing) Robotic Ltd,.Co Copyright owner
30
1.4.5.
Equipment Calibration
1.4.5.1.
Compass Calibration
Method 1: Access the calibration function in the APP installed on the remote control:
Step1：
Pull down the throttle.
Step2：
Quickly toggle down "Flight Mode Switch" to the down position ("S") and toggle it
up to the up position(“G”) for about 6-10 cycles until the status indicator light flashes
blue.
Step3：
Place the drone head forward and keep the drone level with the ground. Slowly
rotate clockwise for at least one circle until the status indicator flashes green.
Step4：
Turn the drone head down with the body vertical to the ground. Slowly rotate the
drone clockwise for at least one circle until the status indicator shows solid green for
four seconds.
Step5：
Calibration fails if the status indicator shows solid red for 4 seconds. Repeat step
2-4 until the operation succeeds. See Figure 1-4-7.
Figure 1-4-7 Compass calibrate
Method 2: Enter the calibration function via APP:
Step1：
Click
on the right top in the APP to enter the Setting interface, and the click
into Flight Setting
；
Step2：
Click
, and the drone navigation light flashes blue.
Step3：
Repeat the Step 3-5 in Method 1.
Notes:
1.
Before calibration, the propellers on the drone should be removed.
2.
Do not calibrate it in areas with strong magnetic fields, such as magnetic mines,
parking lots, building area with underground steel reinforcement, etc. During the
calibration, do not carry ferromagnetic materials, such as keys, mobile phones, etc.
3.
Do not calibrate the compass indoors.
Rotate vertically clockwise at
least one circle
Until blue flash
Until green flash
Solid red for 4
seconds
Solid green for 4
seconds
Re-calibrate
Rotate horizontally clockwise
for at least one circle
Throttle down
