TOPPIN Comfy Air TPHM002, Руководство пользователя

Страница: 5 / 14

Page 5 Page 6
If there is not enough water inside the water tank, the humidifier
will not mist*.
To cancel the timer setting, tap the Timer button to select Timer Off
(all the 3 LEDs will flash on and go out).
*Low Water Auto-Off Protection
When a low water level is detected by Low Water Sensor, the
humidifier will stop misting. 3 beeps will be heard, and tank light will
flash and then go out. It is designed for safety concern to prevent the
humidifier from possibly overheating and damaging the nebulizer.
Remove the tank cover, fill the water
tank with tap water till the Max
Water Level Line. Put the tank cover
back on. Make sure it fits securely
for smooth misting.
Add drops of essential oil directly to
the tank (if needed) when there’s
enough water.
Tap the Power button to power on
the device. The button and mist
indicator will light up white showing
the current level of mist speed (high
by default) with a beep sound.
When the unit is on, tap the Mist
button to cycle through L -> M -> H
mist levels. The corresponding LED
indicator will light up solid white with
a beep sound.
Tap the Timer button to set the timer
as 2H / 4H / 8H / Timer Off. The
corresponding LED indicator will light
up green with a beep sound for each
timer setting and then go out, while
all the 3 LEDs will be on and off when
timer is set off.
Tap and hold the Power button for
about 3s to turn the device off (both
mist and light off).
The airflow will
continue for 15s after mist off to
dry the mist tube.
(3 seconds)
Note: Excessive water will flow out from the overflow hole when
you overfill the tank.
Connect the power cord of the
humidifier to a power source, the
unit is in standby mode.
Add Water
Mist Adjustment
Timer Setting
Power On & Off
OPERATIONS AND FUNCTION
2H 4H 8H
L M H
2H 4H 8H
L M H
2H 4H 8H
L M H
2H 4H 8H
L M H