SPECIFICATIONS
WHAT’S IN THE BOX
TROUBLESHOOTING
Water vapor
and humidity
are not
produced.
Air blows but
water vapor is
not produced.
Humidity level
is low.
The mist has a
bad smell.
White dust is
forming on
nearby
furniture.
Power plug - unplug cord from the humidifier,
try again.
Power failure - when power is restored, try
again.
Tank/Mist cover installation - make sure both
tank cover and mist cover are attached
correctly.
The surface of the nebulizer is dirty - wipe
with soft cloth.
Dirty tank - wash out tank and try again.
Dirty mist chamber - wash out chamber and
try again.
Dirty nebulizer – wipe clean the part with a
soft cloth.
Use of distilled water - 3 pinches of salt must
be added to distilled water, stir to ensure
thorough mixing. Caution: Add salt only by
pinch, because too much salt added to the
water can cause excessive boiling, blowing of
fuse, or a stuck circuit breaker.
Ambient humidity is higher than desired level.
The surface of the nebulizer is dirty - Wipe the
part with a soft cloth.
The water in the unit is too cold - replace with
cool, but not cold, water.
Poor maintenance or dirty water - clean the
tank and chamber thoroughly according to
instructions above and fill with fresh water.
Hard water may deposit a dust-like residue. In
addition, dust in the air may settle due to the
added humidity in the room. If this becomes a
nuisance, use distilled water.
1 x Toppin Comfy Air H1 Ultrasonic Humidifier
1 x Clean Brush
1 x User Guide Kit
Note:
Pay attention when lifting both the covers in case of water drops on the
surface.
Empty water from the water tank away from the air outlet.
The ceramic disc should not come in contact with any hard or sharp objects.
To remove possible buildup, rinse with a white vinegar and water solution.
Dry thoroughly with a soft cloth.
Do not use strong cleaning agents.
Make sure the power cord and plug are let dry before next use.
Model
Water Tank Material
Working Voltage
Power Consumption
Frequency
Water Tank Capacity
Mist Level
Run Time per Tank
Timer Options
1H – 24H
≤29dB (from 3ft away)
Supported
368 x 210 x 146mm / 14.5 x 8.3 x 5.7in
1.7kg / 3.75lbs
Operating Noise
Low Water Level Protection
Dimensions
Net Weight
TPHM001
Problem
Possible Causes & Solution
ABS
110V~
，
60Hz
30W
1.7±0.1MHz
5L / 1.3gal
3 levels (Low / Medium / High)
Up to 14H (high mist level)
Up to 30H (medium mist level)
Up to 72H (low mist level)
Page.11
Page.12
