Page 5
Page 6
Fan Speed / Decorative Light Button
Carefully remove your air purifier from the packaging box and
plastic bag.
Remove the filter from the air purifier (see Replacing the Filter on
page 6), remove the protective plastic, and then insert the filter
into the unit.
Place it on a firm, level and flat area.
*For proper air flow, locate the unit at least 1ft / 30cm away from
any wall or furniture.
*Make sure none of the grilles are blocked.
Plug the power adapter into an appropriate voltage AC outlet. A
beep will be heard, and all lights will light up and stay solid on for
3s until the device enters the standby mode.
•
When the purifier is on, press to adjust 3 levels of the fan speed and
cycle through 1-Low, 2-Medium, and 3-High settings.
•
Press and hold for 3s to turn on / off the Decorative Light.
Note: The corresponding speed level indicator will light up when a
speed level is selected.
IMPORTANT
! When the unit is not in use, please switch it off and unplug from
power.
1.
2.
3.
4.
Press to turn on / off the unit, the Power indicator and
corresponding speed level indicator will turn on / off.
When the device is on, press and hold for 3s to turn on / off the
UV light, and the UV Light indicator will light up.
Note:
By default, each time the device is powered on, initially the fan
speed is at the 2-Medium level and UV light is on.
All LED indicators are blue when lighting up.
When UV Light is turned off, the UV Light indicator will also go out.
•
•
1.
2.
3.
IMPORTANT:
! When moving the air purifier, always lift the unit firmly by both
hands and set down gently on a flat and level surface.
! Do not use any other AC adapter other than the one provided with
the unit.
1. Turn your machine OFF and unplug
the device.
2. Unlock the base cover by rotating
the base counterclockwise.
Pre-Operation Instructions
Replacing the Filter
Power / UV Light Button
OPERATIONS AND FUNCTION
