4. Rigging the Spinnaker Kit
4:1 Tie one end of the Spinnaker halyard around the front furler bar.
4:2 Take the other free end of the halyard and take it through this pulley
on the front of the cross beam.
4:3 Take the free end of the halyard through this cleat; it is underneath
the spinnaker chute, and it may need to be moved for the pulley to be exposed.
4:4 Take the halyard through this pulley that is mounted on top of the crossbeam.
4:5 Take the halyard back through this pulley next to the centreboard.
9
