24
C30S
6- USE AND OPERATION
INSTALLATION AND USE ISTRUCTIONS
DO NOT OPERATE DOME WINDOWS IN THE PRESENCE OF A LOAD OF SNOW IN
EXCESS OF THE QUANTITY DECLARED ACCEPTABLE BY THE WINDOW
MANUFACTURER.
ALL ABOVE MENTIONED MAINTENANCE INTERVENTIONS MAY BE PERFORMED
EXCLUSIVELY BY TECHNICAL COMPETENT AND QUALIFIED TECHNICAL
PERSONNEL SATISFYING THE TECHNICAL AND PROFESSIONAL REQUIREMENTS
FORESEEN BY THE LAW IN FORCE IN THE COUNTRY OF INSTALLATION.
I N O R D E R F O R T H E A U TO M AT I O N U N I T TO O P E R AT E C O R R E C T LY, W E
RECOMMEND CARRYING OUT PERIODICAL MAINTENANCE ON IT, AS INDICATED
IN PAR. 7.1 OF THIS MANUAL.
TOPP INFORMS THE USER THAT, IN ACCORDANCE WITH ART. 8 OF MINISTERIAL
DECREE NO. 38 OF 22.1.2008, THE OWNER OF THE SYSTEM IS RESPONSIBLE FOR
ADOPTING ALL NECESSARY MEASURES TO MAINTAIN THE SAFETY FEATURES
SET OUT IN APPLICABLE LEGISLATION, OBSERVING THE INSTRUCTIONS FOR
MAINTENANCE AND USE PROVIDED BY THE MANUFACTURER OF THE DEVICE
AND BY THE COMPANY THAT CARRIED OUT THE INSTALLATION.
The use of the actuator allows to control automatically the opening and closing of the
window according to the type of control device installed
(see par. 5.5)
.
6.2- SMART RESET SYSTEM (SAI)
The Smart Reset System (SAI) i
s integrated into the software of the electronic control
board of
C30S
actuator. This system adjusts the closure of the window in a highly
efficient fashion so as not to damage the window in any way. If you were to put an
obstacle in the way while the window is closing, the
SAI
would block the actuator(s)
attached to the window to avoid damaging it. If this happens in the last 5 cm of the
movement, that is below the allowable maximum overlap, you might find that the
window remains slightly open the next time it is closed. You only need to briefly open
and close the window a few times (about 4-5 times) to activate the
SAI
system and
restore the window to its correct and proper closure.
